Hello,

A Windows Server 2003 Standard Edition R2 server repeatidley has the SNMP
service crash. The following is logged in the Event Viewer:

Event Type: Error
Event Source: SNMP
Event Category: None
Event ID: 1501
Date: 5/4/2009
Time: 5:06:45 AM
User: N/A
Computer: XXX
Description:
The SNMP Service encountered an error while setting up the incoming
transports.\n The IP transport has been dropped out.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 47 27 00 00 G'..

Could anyone point me in the right direction as far as figuring out why this
service continues to crash every few hours?

Thanks,
-B

Quote:

Hello, A Windows Server 2003 Standard Edition R2 server repeatidley has the SNMP service crash. The following is logged in the Event Viewer: Event Type: Error Event Source: SNMP Event Category: None Event ID: 1501 Date: 5/4/2009 Time: 5:06:45 AM User: N/A Computer: XXX Description: The SNMP Service encountered an error while setting up the incoming transports.\n The IP transport has been dropped out. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 47 27 00 00 G'.. Could anyone point me in the right direction as far as figuring out why this service continues to crash every few hours? Thanks, -B

Is your NIC driver as current as possible?

- Thee Chicago Wolf

Hello Brock,

Make sure you use the latest NIC drivers. Any additional errors in the event
viewer? Do you use some other softwware that depends on snmp and there is
a conflict between them?

Read also a posting where a hotfix should be available also for 2003. All
info's i found on the web are for 2008/vista. So i would call MS support.
Hotfixes are free so no additional cost.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Quote:

Hello, A Windows Server 2003 Standard Edition R2 server repeatidley has the SNMP service crash. The following is logged in the Event Viewer: Event Type: Error Event Source: SNMP Event Category: None Event ID: 1501 Date: 5/4/2009 Time: 5:06:45 AM User: N/A Computer: XXX Description: The SNMP Service encountered an error while setting up the incoming transports.\n The IP transport has been dropped out. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 47 27 00 00 G'.. Could anyone point me in the right direction as far as figuring out why this service continues to crash every few hours? Thanks, -B

Hello,

The first thing we did was ensure we had the latest network card drivers.

I believe the issue may be related to the /3GB switch enabled in the
boot.ini file.

We have removed the /3GB switch and rebooted, the problem has yet to repeat.

I'll update if it repeats.

Thanks,
-B

"Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66222d68cb9aff441d3243@msnews.microsoft.com...

Quote:

Hello Brock, Make sure you use the latest NIC drivers. Any additional errors in the event viewer? Do you use some other softwware that depends on snmp and there is a conflict between them? Read also a posting where a hotfix should be available also for 2003. All info's i found on the web are for 2008/vista. So i would call MS support. Hotfixes are free so no additional cost. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm Hello, A Windows Server 2003 Standard Edition R2 server repeatidley has the SNMP service crash. The following is logged in the Event Viewer: Event Type: Error Event Source: SNMP Event Category: None Event ID: 1501 Date: 5/4/2009 Time: 5:06:45 AM User: N/A Computer: XXX Description: The SNMP Service encountered an error while setting up the incoming transports.\n The IP transport has been dropped out. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 47 27 00 00 G'.. Could anyone point me in the right direction as far as figuring out why this service continues to crash every few hours? Thanks, -B

Hello,

This is just a Web Server (IIS6), fairly new as well.

We have yet to receive reports since removing the /3GB switch. We should
know by tomorrow if that resolved the issue as it was only taking a few
hours to fail previously.

-B


"Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66223598cb9b148985b3b3@msnews.microsoft.com...

Quote:

Hello Brock, What service/role/application does the server run? Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm Hello, The first thing we did was ensure we had the latest network card drivers. I believe the issue may be related to the /3GB switch enabled in the boot.ini file. We have removed the /3GB switch and rebooted, the problem has yet to repeat. I'll update if it repeats. Thanks, -B "Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message news:ff16fb66222d68cb9aff441d3243@msnews.microsoft.com... Hello Brock, Make sure you use the latest NIC drivers. Any additional errors in the event viewer? Do you use some other softwware that depends on snmp and there is a conflict between them? Read also a posting where a hotfix should be available also for 2003. All info's i found on the web are for 2008/vista. So i would call MS support. Hotfixes are free so no additional cost. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm Hello, A Windows Server 2003 Standard Edition R2 server repeatidley has the SNMP service crash. The following is logged in the Event Viewer: Event Type: Error Event Source: SNMP Event Category: None Event ID: 1501 Date: 5/4/2009 Time: 5:06:45 AM User: N/A Computer: XXX Description: The SNMP Service encountered an error while setting up the incoming transports.\n The IP transport has been dropped out. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 47 27 00 00 G'.. Could anyone point me in the right direction as far as figuring out why this service continues to crash every few hours? Thanks, -B

Hello Brock,

What service/role/application does the server run?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Quote:

Hello, The first thing we did was ensure we had the latest network card drivers. I believe the issue may be related to the /3GB switch enabled in the boot.ini file. We have removed the /3GB switch and rebooted, the problem has yet to repeat. I'll update if it repeats. Thanks, -B "Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message news:ff16fb66222d68cb9aff441d3243@msnews.microsoft.com... Hello Brock, Make sure you use the latest NIC drivers. Any additional errors in the event viewer? Do you use some other softwware that depends on snmp and there is a conflict between them? Read also a posting where a hotfix should be available also for 2003. All info's i found on the web are for 2008/vista. So i would call MS support. Hotfixes are free so no additional cost. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm Hello, A Windows Server 2003 Standard Edition R2 server repeatidley has the SNMP service crash. The following is logged in the Event Viewer: Event Type: Error Event Source: SNMP Event Category: None Event ID: 1501 Date: 5/4/2009 Time: 5:06:45 AM User: N/A Computer: XXX Description: The SNMP Service encountered an error while setting up the incoming transports.\n The IP transport has been dropped out. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 47 27 00 00 G'.. Could anyone point me in the right direction as far as figuring out why this service continues to crash every few hours? Thanks, -B

Quote:

The first thing we did was ensure we had the latest network card drivers. I believe the issue may be related to the /3GB switch enabled in the boot.ini file. We have removed the /3GB switch and rebooted, the problem has yet to repeat. I'll update if it repeats.

If that's the case then you may just be running out of page table
entry (PTE) space or non-paged pool and need to use the /USERVA switch
to give back some of the 3GB address space back to the app or OS so as
not to starve PTEs and your non-paged pool. I've had good success with
using /3GB /Userva=2944 which allocates 128MB for PTEs and non-paged
pool. If it still acts odd, try increasing by 16 or 32MB increments
and see if you can find a happy balance. By the way, this machine does
have 4GB, yes?

Hello,

It does appear removing the /3GB switch resolved the issue; it has yet to
repeat.

Thank you for the detailed reply here, I will certainly look into the
possible settings.

Thanks,
-B

p.s. yes 4GB

"Thee Chicago Wolf (MVP)" <.@.> wrote in message
news:hfa005t1pvtkb42c082q0mshvcno6084ne@4ax.com...

Quote:

The first thing we did was ensure we had the latest network card drivers. I believe the issue may be related to the /3GB switch enabled in the boot.ini file. We have removed the /3GB switch and rebooted, the problem has yet to repeat. I'll update if it repeats. If that's the case then you may just be running out of page table entry (PTE) space or non-paged pool and need to use the /USERVA switch to give back some of the 3GB address space back to the app or OS so as not to starve PTEs and your non-paged pool. I've had good success with using /3GB /Userva=2944 which allocates 128MB for PTEs and non-paged pool. If it still acts odd, try increasing by 16 or 32MB increments and see if you can find a happy balance. By the way, this machine does have 4GB, yes?

Quote:

Hello, It does appear removing the /3GB switch resolved the issue; it has yet to repeat. Thank you for the detailed reply here, I will certainly look into the possible settings. Thanks, -B p.s. yes 4GB

Ok. Lots more info on the userva switch on the MS site.